The L-RAY/2000 is the systematic further development of the L-RAY/1000.
- The aim was to considerably increase the power capability in all areas of the system and thus improve the practical operation.
- This has been achieved by using high-power class D amplifiers and larger speakers with a considerably higher power capability and a higher efficiency.
- The high-performance magnetostatic tweeters operate on preceding waveguides which result in a good acoustic coupling of the individual systems.
- A 6.5" special system which has especially been developed for radiating the important midrange is supported in the lower midrange by two further 6.5" bass-midrange speakers.
- Two 12" systems of long excursion radiate the bass range and provide a solid and powerful deep fundamental bass reproduction, even without subwoofer support.
- The DSP system with the respective software is identical to the one included in the L-RAY/1000 and impresses by an easy and intuitive operation.
- The system is supplied with the same robust mounting frame which is suitable for suspended installation or ground-stacked configuration.
- The array elements can be curved in steps of 1°.
- The individual components can be locked with quick-release pins.
- The mounting frame also allows for suspended installation of the array elements only, without the subwoofer.
Professional PA speaker array (controlled by DSP software), active, 3,400 WMAX, 2,000 WRMS (1,000 W+1,000 W)
- Array of high power capability with 4 mid-high range speaker units and a dual bass module
- Mounting frame for suspended installation or ground-stacked configuration
- The array elements can be curved in steps of 1°
- Quick and easy installation with quick-release pins
- DSP-controlled 2-way active module with digital amplifiers
- The software allows the following adjustments (min. system requirement is a Windows PC only, WIN98 or higher, with CD drive and interface):
- Parametric equalizer (6 bands)
- Filters (high-pass or low-pass up to 36 dB/oct. with various characteristics)
- Gain, level at the inputs and outputs
- Compressor and limiter
- Delay
- Up to 10 L-RAY systems can be addressed via one RS-485 data bus. With the optional USB/RS-485 converter DA-70157, a PC or laptop with USB interface can be connected to the serial RS-485 interface
- The factory presets are stored in the system and can be restored at any time
- System connection cable (NEUTRIK SPEAKON)
- Mains connection via PowerCon® jack (e.g. with mains cable AAC-115P)
- The robust wooden cabinets made of birch plywood feature grilles and a durable structured coating
The L-RAY/2000 is a very high-quality solution for any PA application where both a perfect tonality and a perfect radiation across the room are required.
- The advantages of the system particularly take effect with fixed installations in clubs and discotheques as well as mobile stage applications.
- For larger PA applications, the use of several L-RAY systems in a cluster is recommended.
- For installation by experts only! Please pay attention to the use of appropriate installation material, as otherwise persons and units will be put at risk.
- The unit is equipped with a PowerCon® jack. Supplied without mains cable (AAC-115P is available at option).